Marlin_Firmware/Marlin/pins_MINIRAMBO.h

116 lines
3.1 KiB
C
Raw Normal View History

/**
2016-03-24 13:01:20 -05:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2015-06-02 09:04:29 -05:00
/**
* Mini-Rambo pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
2015-06-02 09:04:29 -05:00
#endif
2015-07-31 09:36:20 -05:00
#define LARGE_FLASH true
2015-06-02 09:04:29 -05:00
2015-07-31 09:36:20 -05:00
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 30
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 24
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 23
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 3
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
2015-06-02 09:04:29 -05:00
#if ENABLED(BARICUDA)
2015-07-31 09:36:20 -05:00
#define HEATER_2_PIN 6
2015-06-02 09:04:29 -05:00
#endif
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
2015-07-31 09:36:20 -05:00
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
2015-06-02 09:04:29 -05:00
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
#define MOTOR_CURRENT_PWM_XY_PIN 46
2015-07-31 09:36:20 -05:00
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44
2015-06-02 09:04:29 -05:00
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
2015-07-31 09:36:20 -05:00
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 8
#define FAN_1_PIN 6
2015-06-02 09:04:29 -05:00
#if ENABLED(ULTRA_LCD)
2015-07-31 01:19:47 -05:00
2015-07-31 09:36:20 -05:00
#define KILL_PIN 32
2015-07-31 01:19:47 -05:00
#if ENABLED(NEWPANEL)
2016-06-04 14:29:01 -05:00
// Beeper on AUX-4
#define BEEPER_PIN 84
2015-07-31 09:36:20 -05:00
#define LCD_PINS_RS 82
2015-06-02 09:04:29 -05:00
#define LCD_PINS_ENABLE 18
2015-07-31 09:36:20 -05:00
#define LCD_PINS_D4 19
#define LCD_PINS_D5 70
#define LCD_PINS_D6 85
#define LCD_PINS_D7 71
2015-06-02 09:04:29 -05:00
//buttons are directly attached using AUX-2
2015-07-31 09:36:20 -05:00
#define BTN_EN1 14
#define BTN_EN2 72
#define BTN_ENC 9 // the click
2015-06-02 09:04:29 -05:00
#define SD_DETECT_PIN 15
2015-06-02 09:04:29 -05:00
2015-07-31 01:19:47 -05:00
#endif //NEWPANEL
2015-06-02 09:04:29 -05:00
#endif //ULTRA_LCD