Marlin_Firmware/Marlin/pins_BRAINWAVE_PRO.h

99 lines
2.5 KiB
C
Raw Normal View History

/**
2016-03-24 13:01:20 -05:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Brainwave Pro pin assignments (AT90USB1286)
*
* Requires hardware bundle for Arduino:
* https://github.com/unrepentantgeek/brainwave-arduino
*/
#ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Brainwave Pro' selected from the 'Tools -> Boards' menu."
#endif
#include "fastio.h"
#if DISABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
#error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
#endif
#define BOARD_NAME "Brainwave Pro"
2016-09-16 13:24:32 -05:00
#define USBCON 1286 // Disable MarlinSerial etc.
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 47
#define Y_STOP_PIN 18
#define Z_MAX_PIN 36
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 17
#endif
//
// Steppers
//
#define X_STEP_PIN 33
#define X_DIR_PIN 32
#define X_ENABLE_PIN 11
#define Y_STEP_PIN 31
#define Y_DIR_PIN 30
#define Y_ENABLE_PIN 8
#define Z_STEP_PIN 29
#define Z_DIR_PIN 28
#define Z_ENABLE_PIN 37
#define E0_STEP_PIN 35
#define E0_DIR_PIN 34
#define E0_ENABLE_PIN 13
//
// Temperature Sensors
//
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering
#define TEMP_1_PIN 1 // Spare / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
//
// Heaters / Fans
//
#define HEATER_0_PIN 15
#define HEATER_BED_PIN 14 // Bed
#define FAN_PIN 16 // Fan, PWM
//
// LCD / Controller
//
#define SDSS 20
#define SD_DETECT_PIN 12
#define LED_PIN 19