Marlin_Firmware/Marlin/language_ca.h

261 lines
15 KiB
C
Raw Normal View History

/**
2016-03-24 13:01:20 -05:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Catalan
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_CA_H
#define LANGUAGE_CA_H
#define MAPPER_C2C3 // because of "ó"
#define DISPLAY_CHARSET_ISO10646_1
2016-12-12 09:18:53 -06:00
#define WELCOME_MSG MACHINE_NAME _UxGT(" preparada.")
2017-02-15 11:24:58 -06:00
#define MSG_SD_INSERTED _UxGT("Targeta detectada.")
#define MSG_SD_REMOVED _UxGT("Targeta extreta.")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops")
#define MSG_MAIN _UxGT("Menú principal")
2016-12-12 09:18:53 -06:00
#define MSG_AUTOSTART _UxGT("Inici automatic")
2017-02-15 11:24:58 -06:00
#define MSG_DISABLE_STEPPERS _UxGT("Desactiva motors")
#define MSG_DEBUG_MENU _UxGT("Menu de depuracio")
#define MSG_PROGRESS_BAR_TEST _UxGT("Test barra progres")
#define MSG_AUTO_HOME _UxGT("Ves a l'origen")
#define MSG_AUTO_HOME_X _UxGT("X a origen")
#define MSG_AUTO_HOME_Y _UxGT("Y a origen")
#define MSG_AUTO_HOME_Z _UxGT("Z a origen")
#define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Premeu per iniciar")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Següent punt")
#define MSG_LEVEL_BED_DONE _UxGT("Anivellament fet!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancel.la")
#define MSG_SET_HOME_OFFSETS _UxGT("Ajusta decalatge")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalatge aplicat")
#define MSG_SET_ORIGIN _UxGT("Estableix origen")
#define MSG_PREHEAT_1 _UxGT("Preescalfa PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Llit")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf.")
#define MSG_PREHEAT_2 _UxGT("Preescalfa ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Llit")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Conf.")
#define MSG_COOLDOWN _UxGT("Refreda")
2016-12-12 09:18:53 -06:00
#define MSG_SWITCH_PS_ON _UxGT("Switch power on")
#define MSG_SWITCH_PS_OFF _UxGT("Switch power off")
2017-02-15 11:24:58 -06:00
#define MSG_EXTRUDE _UxGT("Extrudeix")
#define MSG_RETRACT _UxGT("Retreu")
#define MSG_MOVE_AXIS _UxGT("Mou eixos")
#define MSG_LEVEL_BED _UxGT("Anivella llit")
#define MSG_MOVING _UxGT("Movent..")
#define MSG_FREE_XY _UxGT("XY lliures")
#define MSG_MOVE_X _UxGT("Mou X")
#define MSG_MOVE_Y _UxGT("Mou Y")
#define MSG_MOVE_Z _UxGT("Mou Z")
2016-12-12 09:18:53 -06:00
#define MSG_MOVE_E _UxGT("Extrusor")
2017-02-15 11:24:58 -06:00
#define MSG_MOVE_01MM _UxGT("Mou 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mou 1mm")
#define MSG_MOVE_10MM _UxGT("Mou 10mm")
2016-12-12 09:18:53 -06:00
#define MSG_SPEED _UxGT("Velocitat")
2017-02-15 11:24:58 -06:00
#define MSG_BED_Z _UxGT("Llit Z")
2016-12-12 09:18:53 -06:00
#define MSG_NOZZLE _UxGT("Nozzle")
#define MSG_BED _UxGT("Llit")
#define MSG_FAN_SPEED _UxGT("Vel. Ventilador")
2017-02-15 11:24:58 -06:00
#define MSG_FLOW _UxGT("Flux")
2016-12-12 09:18:53 -06:00
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("On ")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
2017-02-15 11:24:58 -06:00
#define MSG_SELECT _UxGT("Select")
2016-12-12 09:18:53 -06:00
#define MSG_ACC _UxGT("Accel")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
2017-02-15 11:24:58 -06:00
#define MSG_VTRAV_MIN _UxGT("VViatge min")
#define MSG_AMAX _UxGT("Accel. max ")
#define MSG_A_RETRACT _UxGT("Accel. retracc")
#define MSG_A_TRAVEL _UxGT("Accel. Viatge")
2016-12-12 09:18:53 -06:00
#define MSG_XSTEPS _UxGT("Xpassos/mm")
#define MSG_YSTEPS _UxGT("Ypassos/mm")
#define MSG_ZSTEPS _UxGT("Zpassos/mm")
#define MSG_ESTEPS _UxGT("Epassos/mm")
#define MSG_E1STEPS _UxGT("E1passos/mm")
#define MSG_E2STEPS _UxGT("E2passos/mm")
#define MSG_E3STEPS _UxGT("E3passos/mm")
#define MSG_E4STEPS _UxGT("E4passos/mm")
2017-04-09 03:23:05 -05:00
#define MSG_E5STEPS _UxGT("E5passos/mm")
2016-12-12 09:18:53 -06:00
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Moviment")
2017-04-16 23:00:08 -05:00
#define MSG_FILAMENT _UxGT("Filament")
2017-02-15 11:24:58 -06:00
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.")
2016-12-12 09:18:53 -06:00
#define MSG_CONTRAST _UxGT("Contrast de LCD")
#define MSG_STORE_EEPROM _UxGT("Desa memoria")
#define MSG_LOAD_EEPROM _UxGT("Carrega memoria")
2017-02-15 11:24:58 -06:00
#define MSG_RESTORE_FAILSAFE _UxGT("Restaura valors")
#define MSG_REFRESH _UxGT("Actualitza")
2016-12-12 09:18:53 -06:00
#define MSG_WATCH _UxGT("Pantalla Info.")
2017-02-15 11:24:58 -06:00
#define MSG_PREPARE _UxGT("Prepara")
#define MSG_TUNE _UxGT("Ajusta")
#define MSG_PAUSE_PRINT _UxGT("Pausa impressio")
#define MSG_RESUME_PRINT _UxGT("Repren impressio")
#define MSG_STOP_PRINT _UxGT("Atura impressio.")
#define MSG_CARD_MENU _UxGT("Imprimeix de SD")
#define MSG_NO_CARD _UxGT("No hi ha targeta")
#define MSG_DWELL _UxGT("En repos...")
2016-12-12 09:18:53 -06:00
#define MSG_USERWAIT _UxGT("Esperant usuari..")
#define MSG_RESUMING _UxGT("Reprenent imp.")
2017-02-15 11:24:58 -06:00
#define MSG_PRINT_ABORTED _UxGT("Imp. cancelada")
2016-12-12 09:18:53 -06:00
#define MSG_NO_MOVE _UxGT("Sense moviment.")
2017-02-15 11:24:58 -06:00
#define MSG_KILLED _UxGT("MATAT.")
#define MSG_STOPPED _UxGT("ATURADA.")
#define MSG_CONTROL_RETRACT _UxGT("Retreu mm")
2016-12-12 09:18:53 -06:00
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Retreure mm")
2017-02-15 11:24:58 -06:00
#define MSG_CONTROL_RETRACTF _UxGT("Retreu V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Aixeca mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet +mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap DesRet +mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V")
#define MSG_AUTORETRACT _UxGT("Auto retraccio")
#define MSG_FILAMENTCHANGE _UxGT("Canvia filament")
#define MSG_INIT_SDCARD _UxGT("Inicialitza SD")
#define MSG_CNG_SDCARD _UxGT("Canvia SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z fora")
#define MSG_BLTOUCH_RESET _UxGT("Reinicia BLTouch")
2016-12-12 09:18:53 -06:00
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
2017-02-15 11:24:58 -06:00
#define MSG_FIRST _UxGT("primer")
#define MSG_ZPROBE_ZOFFSET _UxGT("Decalatge Z")
#define MSG_BABYSTEP_X _UxGT("Micropas X")
#define MSG_BABYSTEP_Y _UxGT("Micropas Y")
#define MSG_BABYSTEP_Z _UxGT("Micropas Z")
#define MSG_ENDSTOP_ABORT _UxGT("Cancel. Endstop")
#define MSG_HEATING_FAILED_LCD _UxGT("Error al escalfar")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP REDUNDANT")
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MAXIMA")
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMPMAX LLIT")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMPMIN LLIT")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z No permes")
#define MSG_HALTED _UxGT("IMPRESSORA PARADA")
#define MSG_PLEASE_RESET _UxGT("Reinicieu")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Escalfant...")
#define MSG_HEATING_COMPLETE _UxGT("Escalfament fet.")
#define MSG_BED_HEATING _UxGT("Escalfant llit")
#define MSG_BED_DONE _UxGT("Llit fet.")
#define MSG_DELTA_CALIBRATE _UxGT("Calibratge Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra el centre")
#define MSG_INFO_MENU _UxGT("Quant a la impr.")
#define MSG_INFO_PRINTER_MENU _UxGT("Info Impressora")
#define MSG_INFO_STATS_MENU _UxGT("Estadistiques")
#define MSG_INFO_BOARD_MENU _UxGT("Info placa")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extrusors")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#define MSG_LIGHTS_ON _UxGT("Encen el llum")
#define MSG_LIGHTS_OFF _UxGT("Apaga el llum")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Total impressions")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Acabades")
#define MSG_INFO_PRINT_TIME _UxGT("Temps imprimint")
#define MSG_INFO_PRINT_LONGEST _UxGT("Treball mes llarg")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total extrudit")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Impressions")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Acabades")
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#define MSG_INFO_PRINT_LONGEST _UxGT("Mes llarg")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudit")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Temp. mínima")
#define MSG_INFO_MAX_TEMP _UxGT("Temp. màxima")
#define MSG_INFO_PSU _UxGT("Font alimentacio")
#define MSG_DRIVE_STRENGTH _UxGT("Força motor")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CANVI DE FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPCIONS CANVI:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeix mes")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Repren impressió")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima es ")
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperant per")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("iniciar el canvi")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filament")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperant per")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("treure filament")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Poseu filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i premeu el boto")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("per continuar...")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Premeu boto per")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("escalfar nozzle.")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Escalfant nozzle")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espereu...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperant carrega")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("de filament")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperant per")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extreure filament")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperant per")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("reprendre")
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Espereu...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Expulsant...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insereix i prem")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Escalfant...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregant...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudint...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprenent...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_CA_H