Marlin_Firmware/Marlin/src/pins/mega/pins_GT2560_V3.h

182 lines
3.8 KiB
C
Raw Normal View History

2018-09-27 14:13:15 -05:00
/**
* Marlin 3D Printer Firmware
2019-06-27 23:57:50 -05:00
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2018-09-27 14:13:15 -05:00
*
* Based on Sprinter and grbl.
2019-06-27 23:57:50 -05:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
2018-09-27 14:13:15 -05:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2019-07-04 22:44:12 -05:00
#pragma once
2018-09-27 14:13:15 -05:00
/**
* GT2560 V3.0 pin assignment
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
2018-09-27 14:13:15 -05:00
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "GT2560 V3.0"
#endif
2019-01-26 16:16:21 -06:00
//
// Servos
//
#define SERVO0_PIN 11 //13 untested 3Dtouch
2018-09-27 14:13:15 -05:00
//
// Limit Switches
//
2019-06-05 21:32:10 -05:00
#ifndef X_STOP_PIN
#ifndef X_MIN_PIN
#define X_MIN_PIN 24
#endif
#ifndef X_MAX_PIN
#define X_MAX_PIN 22
#endif
#endif
#ifndef Y_STOP_PIN
#ifndef Y_MIN_PIN
#define Y_MIN_PIN 28
#endif
#ifndef Y_MAX_PIN
#define Y_MAX_PIN 26
#endif
#endif
#ifndef Z_STOP_PIN
#ifndef Z_MIN_PIN
#define Z_MIN_PIN 30
#endif
#ifndef Z_MAX_PIN
#define Z_MAX_PIN 32
#endif
#endif
2018-09-27 14:13:15 -05:00
2019-02-04 22:52:41 -06:00
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
2019-01-30 21:10:56 -06:00
//
// Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 66
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN 67
#endif
//
// Power Recovery
//
#define POWER_LOSS_PIN 69 // Pin to detect power loss
#define POWER_LOSS_STATE LOW
2018-09-27 14:13:15 -05:00
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 39
#define X_ENABLE_PIN 35
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 25
#define Z_DIR_PIN 23
#define Z_ENABLE_PIN 27
#define E0_STEP_PIN 46
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 12
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Temperature Sensors
//
#define TEMP_0_PIN 11 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 3
#define HEATER_2_PIN 1
#define HEATER_BED_PIN 4
#define FAN_PIN 9
2019-02-04 22:52:41 -06:00
//#define FAN1_PIN 8
//#define FAN2_PIN 7
2018-09-27 14:13:15 -05:00
//
// Misc. Functions
//
#define SD_DETECT_PIN 38
#define SDSS 53
#define LED_PIN 6
#define PS_ON_PIN 12
2019-02-04 22:52:41 -06:00
#define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing
2018-09-27 14:13:15 -05:00
#ifndef CASE_LIGHT_PIN
2019-02-04 22:52:41 -06:00
#define CASE_LIGHT_PIN 6 // 21
2018-09-27 14:13:15 -05:00
#endif
//
// LCD Controller
//
#define BEEPER_PIN 18
2019-07-11 02:32:24 -05:00
#ifndef LCD_PINS_RS
#define LCD_PINS_RS 20
#endif
#ifndef LCD_PINS_ENABLE
#define LCD_PINS_ENABLE 17
#endif
#ifndef LCD_PINS_D4
#define LCD_PINS_D4 16
#endif
#ifndef LCD_PINS_D5
#define LCD_PINS_D5 21
#endif
#ifndef LCD_PINS_D6
#define LCD_PINS_D6 5
#endif
#ifndef LCD_PINS_D7
#define LCD_PINS_D7 36
#endif
2018-09-27 14:13:15 -05:00
#if ENABLED(NEWPANEL)
2019-07-11 02:32:24 -05:00
#ifndef BTN_EN1
#define BTN_EN1 42
#endif
#ifndef BTN_EN2
#define BTN_EN2 40
#endif
#ifndef BTN_ENC
#define BTN_ENC 19
#endif
2018-09-27 14:13:15 -05:00
#endif