DrawingBot-CoreXY/Marlin Firmware/buildroot/tests/esp32
bisse 9babd991e2 Add Marlin firmware. Has initial configuration for CoreXY and 1 servo.
Update CAD file with improved clearances for Pilot G2 cartridge clearances after first print.
2021-10-03 20:35:11 -05:00

31 lines
962 B
Bash

#!/usr/bin/env bash
#
# Build tests for ESP32
#
# exit on first failure
set -e
#
# Build with the default configurations
#
restore_configs
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 TX_BUFFER_SIZE 64 \
WIFI_SSID '"ssid"' WIFI_PWD '"password"'
opt_enable WIFISUPPORT WEBSUPPORT GCODE_MACROS BAUD_RATE_GCODE M115_GEOMETRY_REPORT REPETIER_GCODE_M360
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT" "$3"
#
# Build with TMC drivers using hardware serial
#
restore_configs
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2208 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209 \
X_HARDWARE_SERIAL Serial1 Y_HARDWARE_SERIAL Serial1 Z_HARDWARE_SERIAL Serial1 E0_HARDWARE_SERIAL Serial1 \
X_SLAVE_ADDRESS 0 Y_SLAVE_ADDRESS 1 Z_SLAVE_ADDRESS 2 E0_SLAVE_ADDRESS 3
opt_enable HOTEND_IDLE_TIMEOUT SOFTWARE_DRIVER_ENABLE
exec_test $1 $2 "ESP32, TMC HW Serial, Hotend Idle" "$3"
# cleanup
restore_configs