Add inkscape template. Add gcode header and footer. Add text file containing regex for modifying gcode.

CAD Files/console.log

@@ -0,0 +1,5 @@
+Level: Info
+Message: DisplayMarketplaceWelcomePage() sw3DPrintConnector undefined
+Source: file:///C:/Users/bisse/AppData/Local/Temp/swcachedir/SWMarketplaceAddin/SWMarketplaceWelcome.html?homeURL=https%3a%2f%2feu1-ifwe.3dexperience.3ds.com%2f%3faddinmode%3dsolidworks%26utm_medium%3dNATIVE_APP
+Line: 208
+-----------------------

Marlin Firmware/Marlin/Configuration.h

@@ -143,7 +143,7 @@
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "Drawbot CoreXY"
+#define CUSTOM_MACHINE_NAME "Drawbot CoreYX"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -163,7 +163,9 @@
  *
  * :[3, 4, 5, 6]
  */
-#define LINEAR_AXES 3
+//#define LINEAR_AXES 3
+#define LINEAR_AXES 2
+#define Z_AXIS 0
 
 /**
  * Axis codes for additional axes:
@@ -192,7 +194,7 @@
 
 // This defines the number of extruders
 // :[0, 1, 2, 3, 4, 5, 6, 7, 8]
-#define EXTRUDERS 1
+#define EXTRUDERS 0
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
@@ -460,7 +462,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  */
-#define TEMP_SENSOR_0 1
+#define TEMP_SENSOR_0 0
 #define TEMP_SENSOR_1 0
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
@@ -728,10 +730,10 @@
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
-#define COREXY
+//#define COREXY
 //#define COREXZ
 //#define COREYZ
-//#define COREYX
+#define COREYX
 //#define COREZX
 //#define COREZY
 //#define MARKFORGED_XY  // MarkForged. See https://reprap.org/forum/read.php?152,504042
@@ -746,13 +748,13 @@
 // Almost all printers will be using one per axis. Probes will use one or more of the
 // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
 #define USE_XMIN_PLUG
-#define USE_YMIN_PLUG
+//#define USE_YMIN_PLUG
 #define USE_ZMIN_PLUG
 //#define USE_IMIN_PLUG
 //#define USE_JMIN_PLUG
 //#define USE_KMIN_PLUG
 //#define USE_XMAX_PLUG
-//#define USE_YMAX_PLUG
+#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 //#define USE_IMAX_PLUG
 //#define USE_JMAX_PLUG
@@ -840,7 +842,7 @@
 //#define I_DRIVER_TYPE  A4988
 //#define J_DRIVER_TYPE  A4988
 //#define K_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE A4988
+//#define E0_DRIVER_TYPE A4988
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -895,14 +897,14 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 80}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 50}
+#define DEFAULT_MAX_FEEDRATE          { 300, 300 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -915,11 +917,11 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 50}
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
-  #define MAX_ACCEL_EDIT_VALUES       { 6000, 6000, 200, 20000 } // ...or, set your own edit limits
+  #define MAX_ACCEL_EDIT_VALUES       { 6000, 6000, 200} // ...or, set your own edit limits
 #endif
 
 /**
@@ -998,7 +1000,7 @@
  * The probe replaces the Z-MIN endstop and is used for Z homing.
  * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
  */
-#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 
 // Force the use of the probe for Z-axis homing
 //#define USE_PROBE_FOR_Z_HOMING
@@ -1157,10 +1159,10 @@
 #define XY_PROBE_FEEDRATE (133*60)
 
 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_FEEDRATE_FAST (4*60)
+//#define Z_PROBE_FEEDRATE_FAST (4*60)
 
 // Feedrate (mm/min) for the "accurate" probe of each point
-#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
+//#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
 
 /**
  * Probe Activation Switch
@@ -1215,16 +1217,16 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
+//#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
-#define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+//#define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
-#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
 //#define Z_AFTER_PROBING           5 // Z position after probing is done
 
-#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
+//#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN -20
+//#define Z_PROBE_OFFSET_RANGE_MIN -20
-#define Z_PROBE_OFFSET_RANGE_MAX 20
+//#define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
@@ -1264,7 +1266,7 @@
 #define X_ENABLE_ON 0
 #define Y_ENABLE_ON 0
 #define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
+//#define E_ENABLE_ON 0 // For all extruders
 //#define I_ENABLE_ON 0
 //#define J_ENABLE_ON 0
 //#define K_ENABLE_ON 0
@@ -1283,8 +1285,8 @@
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E false             // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section machine
 
@@ -1328,7 +1330,7 @@
 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
 #define X_HOME_DIR -1
-#define Y_HOME_DIR -1
+#define Y_HOME_DIR 1
 #define Z_HOME_DIR -1
 //#define I_HOME_DIR -1
 //#define J_HOME_DIR -1
@@ -1337,8 +1339,8 @@
 // @section machine
 
 // The size of the printable area
-#define X_BED_SIZE 1000
+#define X_BED_SIZE 711
-#define Y_BED_SIZE 1000
+#define Y_BED_SIZE 927
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1346,7 +1348,7 @@
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 0
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -1715,7 +1717,7 @@
 #endif
 
 // Homing speeds (mm/min)
-#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
+#define HOMING_FEEDRATE_MM_M { (50*60), (50*60) }
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -1792,7 +1794,7 @@
  *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  */
-//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of PROGMEM. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
@@ -1825,17 +1827,17 @@
 //
 // Preheat Constants - Up to 5 are supported without changes
 //
-#define PREHEAT_1_LABEL       "PLA"
+//#define PREHEAT_1_LABEL       "PLA"
-#define PREHEAT_1_TEMP_HOTEND 180
+//#define PREHEAT_1_TEMP_HOTEND 180
-#define PREHEAT_1_TEMP_BED     70
+//#define PREHEAT_1_TEMP_BED     70
-#define PREHEAT_1_TEMP_CHAMBER 35
+//#define PREHEAT_1_TEMP_CHAMBER 35
-#define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
+//#define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
 
-#define PREHEAT_2_LABEL       "ABS"
+//#define PREHEAT_2_LABEL       "ABS"
-#define PREHEAT_2_TEMP_HOTEND 240
+//#define PREHEAT_2_TEMP_HOTEND 240
-#define PREHEAT_2_TEMP_BED    110
+//#define PREHEAT_2_TEMP_BED    110
-#define PREHEAT_2_TEMP_CHAMBER 35
+//#define PREHEAT_2_TEMP_CHAMBER 35
-#define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
+//#define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 /**
  * Nozzle Park

Marlin Firmware/Marlin/Configuration_adv.h

@@ -753,8 +753,8 @@
 
 //#define SENSORLESS_BACKOFF_MM  { 2, 2, 0 }  // (mm) Backoff from endstops before sensorless homing
 
-#define HOMING_BUMP_MM      { 5, 5, 2 }       // (mm) Backoff from endstops after first bump
+#define HOMING_BUMP_MM      { 5, 5 }       // (mm) Backoff from endstops after first bump
-#define HOMING_BUMP_DIVISOR { 2, 2, 4 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
+#define HOMING_BUMP_DIVISOR { 2, 2 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
 
@@ -926,7 +926,8 @@
 
 // @section motion
 
-#define AXIS_RELATIVE_MODES { false, false, false, false }
+//#define AXIS_RELATIVE_MODES { false, false, false, false }
+#define AXIS_RELATIVE_MODES { false, false}
 
 // Add a Duplicate option for well-separated conjoined nozzles
 //#define MULTI_NOZZLE_DUPLICATION
@@ -1164,7 +1165,7 @@
 // @section lcd
 
 #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI)
-  #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_FEEDRATE { 50*60, 50*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"

Marlin Firmware/Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -490,7 +490,7 @@ void MarlinUI::draw_status_screen() {
 
     const xyz_pos_t lpos = current_position.asLogical();
     const bool is_inch = parser.using_inch_units();
-    strcpy(zstring, is_inch ? ftostr42_52(LINEAR_UNIT(lpos.z)) : ftostr52sp(lpos.z));
+    //strcpy(zstring, is_inch ? ftostr42_52(LINEAR_UNIT(lpos.z)) : ftostr52sp(lpos.z));
 
     if (show_e_total) {
       #if ENABLED(LCD_SHOW_E_TOTAL)
@@ -885,7 +885,7 @@ void MarlinUI::draw_status_screen() {
 
       #endif
 
-      _draw_axis_value(Z_AXIS, zstring, blink);
+      //_draw_axis_value(Z_AXIS, zstring, blink);
 
       #if NONE(XYZ_NO_FRAME, XYZ_HOLLOW_FRAME)
         u8g.setColorIndex(1); // black on white

Marlin Firmware/Marlin/src/lcd/menu/menu_advanced.cpp

@@ -390,7 +390,7 @@ void menu_backlash();
 
   // M201 / M204 Accelerations
   void menu_advanced_acceleration() {
-    const float max_accel = _MAX(planner.settings.max_acceleration_mm_per_s2[A_AXIS], planner.settings.max_acceleration_mm_per_s2[B_AXIS], planner.settings.max_acceleration_mm_per_s2[C_AXIS]);
+    const float max_accel = _MAX(planner.settings.max_acceleration_mm_per_s2[A_AXIS], planner.settings.max_acceleration_mm_per_s2[B_AXIS]);
 
     // M201 settings
     constexpr xyze_ulong_t max_accel_edit =

Marlin Firmware/Marlin/src/lcd/menu/menu_motion.cpp

@@ -157,7 +157,7 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int
     switch (axis) {
       case X_AXIS: STATIC_ITEM(MSG_MOVE_X, SS_DEFAULT|SS_INVERT); break;
       case Y_AXIS: STATIC_ITEM(MSG_MOVE_Y, SS_DEFAULT|SS_INVERT); break;
-      case Z_AXIS: STATIC_ITEM(MSG_MOVE_Z, SS_DEFAULT|SS_INVERT); break;
+      //case Z_AXIS: STATIC_ITEM(MSG_MOVE_Z, SS_DEFAULT|SS_INVERT); break;
       default:
         TERN_(MANUAL_E_MOVES_RELATIVE, manual_move_e_origin = current_position.e);
         STATIC_ITEM(MSG_MOVE_E, SS_DEFAULT|SS_INVERT);

Marlin Firmware/Marlin/src/libs/vector_3.h

@@ -76,7 +76,7 @@ struct vector_3 {
   vector_3 operator*(const float &v)    { return vector_3(x * v, y * v, z * v); }
 
   operator xy_float_t() { return xy_float_t({ x, y }); }
-  operator xyz_float_t() { return xyz_float_t({ x, y, z }); }
+  operator xyz_float_t() { return xyz_float_t({ x, y }); }
 
   void debug(PGM_P const title);
 };

Marlin Firmware/Marlin/src/module/planner.cpp

@@ -1894,7 +1894,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   #if CORE_IS_XY
     if (da < 0) SBI(dm, X_HEAD);                // Save the toolhead's true direction in X
     if (db < 0) SBI(dm, Y_HEAD);                // ...and Y
-    if (dc < 0) SBI(dm, Z_AXIS);
+    //if (dc < 0) SBI(dm, Z_AXIS);
     if (da + db < 0) SBI(dm, A_AXIS);           // Motor A direction
     if (CORESIGN(da - db) < 0) SBI(dm, B_AXIS); // Motor B direction
   #elif CORE_IS_XZ
@@ -1952,7 +1952,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   // Number of steps for each axis
   // See https://www.corexy.com/theory.html
   #if CORE_IS_XY
-    block->steps.set(ABS(da + db), ABS(da - db), ABS(dc));
+    block->steps.set(ABS(da + db), ABS(da - db));
   #elif CORE_IS_XZ
     block->steps.set(ABS(da + dc), ABS(db), ABS(da - dc));
   #elif CORE_IS_YZ
@@ -1983,7 +1983,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
     #if CORE_IS_XY
       steps_dist_mm.head.x = da * steps_to_mm[A_AXIS];
       steps_dist_mm.head.y = db * steps_to_mm[B_AXIS];
-      steps_dist_mm.z      = dc * steps_to_mm[Z_AXIS];
+      //steps_dist_mm.z      = dc * steps_to_mm[Z_AXIS];
       steps_dist_mm.a      = (da + db) * steps_to_mm[A_AXIS];
       steps_dist_mm.b      = CORESIGN(da - db) * steps_to_mm[B_AXIS];
     #elif CORE_IS_XZ
@@ -2124,9 +2124,9 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       ENABLE_AXIS_X();
       ENABLE_AXIS_Y();
     }
-    #if DISABLED(Z_LATE_ENABLE)
+    //#if DISABLED(Z_LATE_ENABLE)
-      if (block->steps.z) ENABLE_AXIS_Z();
+    //  if (block->steps.z) ENABLE_AXIS_Z();
-    #endif
+    //#endif
   #elif CORE_IS_XZ
     if (block->steps.a || block->steps.c) {
       ENABLE_AXIS_X();

Marlin Firmware/Marlin/src/module/stepper.cpp

@@ -2717,7 +2717,7 @@ void Stepper::_set_position(const abce_long_t &spos) {
     #if CORE_IS_XY
       // corexy positioning
       // these equations follow the form of the dA and dB equations on https://www.corexy.com/theory.html
-      count_position.set(spos.a + spos.b, CORESIGN(spos.a - spos.b), spos.c);
+      count_position.set(spos.a + spos.b, CORESIGN(spos.a - spos.b));
     #elif CORE_IS_XZ
       // corexz planning
       count_position.set(spos.a + spos.c, spos.b, CORESIGN(spos.a - spos.c));

Tools/footer

@@ -0,0 +1,3 @@
+
+M280 P0 S100
+G0 X.000 Y.000

Tools/header

@@ -0,0 +1,5 @@
+G21 (programming in millimeters, mm)
+G90 (programming in absolute positioning)
+M280 P0 S100
+G28 X Y (auto homing)
+G1 F1500 (set speed)

Tools/regex.txt

@@ -0,0 +1,7 @@
+Find all Z coordinates and replace with nothing
+([ ][Z]([^ |\n])*)
+
+
+Delete blank G00 commands replace with \n
+(\n[G][0][0]\n)
+\n